久久久久久久精品成人热小说,亚洲 欧美 激情 小说 另类,亚洲精品国产精华液,激烈 痉挛 抽搐 潮喷 MP4

Products

Techcon TS9200D Pneumatic Diaphragm Glue Valve

Techcon TS9200D Pneumatic Diaphragm Glue Valve


Techcon TS9200DPneumatic diaphragm injection valve

TS9200D non-contact injection valve can spray viscosity up to400000CpsThe fluid. High speed spraying can spray hundreds of precise droplets per second.

The TS9200D series injection valve adopts a unique diaphragm design. The independent and easily replaceable diaphragm component makes the seals that traditional injection valves do not have redundant, eliminating the need for disassembly, cleaning, and replacement of traditional seals, greatly saving time and costs. Due to the very small volume of the designed diaphragm, high-speed jet frequencies can be achieved. This unique design reduces the power required for glue spraying and the spraying frequency can be adjusted, providing users with a wider process window.





DESCRIPTION

Techcon TS9200DPneumatic diaphragm injection valve

TS9200D non-contact injection valve can spray viscosity up to400000CpsThe fluid. High speed spraying can spray hundreds of precise droplets per second.

The TS9200D series injection valve adopts a unique diaphragm design. The independent and easily replaceable diaphragm component makes the seals that traditional injection valves do not have redundant, eliminating the need for disassembly, cleaning, and replacement of traditional seals, greatly saving time and costs. Due to the very small volume of the designed diaphragm, high-speed jet frequencies can be achieved. This unique design reduces the power required for glue spraying and the spraying frequency can be adjusted, providing users with a wider process window.

Advantages of TS9200D

1. High speed. Can spray per second300A precise droplet, compared to traditional spray valves, has increased50%The output.

2. Easy to clean. There are only two components that come into contact with the liquid. Traditional injection valves can contain up to8A component that needs to be cleaned. Since only two components need to be cleaned, cleaningTS9200DIt only takes a few minutes and there is no need to remove the injection valve from the machine. Without the need for careful calibration of the spray valve, the diaphragm and nozzle plate can be installed immediately, saving valuable production time and eliminating the need for dedicated personnel for offline cleaning.

3. Widely applicable.TS9200DThe high droplet velocity is suitable for a variety of liquids and has a wider range of applications. In addition, the ease of adjusting droplet velocity enables process fine-tuning, thereby helping users achieve high process capability and a wide process window.

4. Low temperature. The advanced driving circuit provides energy for the operation of the injection valve and reduces the driving energy during the idle period of the injection valve. At the same time, even if the injection valve is continuously working at high speed, the internal cooling airflow can ensure that the valve body operates at low temperatures. In addition, the integrated nozzle heating element only heats the liquid inside the nozzle plate and has insulation design with the valve body.

5. Easy to carry. Only one signal trigger line and independentTS9200Connecting controllers enables complex dispensing operations.

Application of TS9200D

Crystal element bonding, fluorescent powder, red glue, UV materials and other adhesive applications in industries such as electrical equipment, LED, medical, etc. Applicable fluids: oil, grease, alcohol, solvents, red glue, silver paste, UV glue.

Characteristics of TS9200D

1. Non contact jet technology

2. High precision

3. High speed, accessible300spot/second

4. Minimum reusable single point10nl

5. Spray viscosity height400K Cps

6. No need to clean or replace the sealing

7. No need to clean or replace seals

8. Integrated heating element provides the required heat

9. Easy to install and operate

10. Low total usage cost


TS9200DSpecification parameters

size

50.8*93.8*88.9mm

weight

348g

speed

highest300HZContinuous work

Needle cylinder capacity

5The10The30The55cc

Minimum Injection Quantity

10nl

Viscosity range

1-400K Cps

Liquid pressure

40psi

Spray pressure

35-70psi

working temperature

10-50


展開
国产网红女主播精品视频| 年轻的母亲 韩国| 琪琪婷婷五月色综合久久| 清冷医生受h打开腿乖听话男男| 亚洲精品无码人妻无码| 精品亚洲AV无码喷奶水LIER| 亚洲同性男男gv在线观看| 欧美性受xxxx黑人xyx| 国产肉体XXXX裸体137大胆| 亚洲色偷偷综合亚洲AVYP| 一本大道精品成人免费视频| 亚洲 欧美 叧类人妖| 极品人妻老师的娇喘呻吟| 日日噜狠狠噜天天噜AV| 国产嫖妓一区二区三区av视频| 母亲とが话しています免费| 久久久久黑人强伦姧人妻| 国产婷婷成人久久AV免费高清| 波多野结衣中文| 苍井空在线av播放| 亚洲精品又粗又大又爽a片| 国产深夜男女无套内射 | 特级做A爰片毛片免费看无码| 狠狠色噜噜狠狠狠狠av| jealousvue成熟五十| 男人10处有痣是富贵痣| 国产又色又爽又黄又刺激视频国语 | 无码AV中文字幕久久专区| bl肉yin荡np公厕肉便| 欧美老妇大p毛茸茸| 上流社会在线观看| 俺去俺来也在线www色官网| 国产YIN乱大巴MAGNET| 亚洲中文字幕无码久久2020 | 国产jjizz女人多水免费| 国产小受呻吟av视频在线观看| 国产欧美一区二区精品性色| 大又大粗又爽又黄少妇毛片| 精品久久久久久无码中文野结衣| 玩弄少妇人妻| 精品无码av无码免费专区|